We’ve all experienced it at some point on how to remove door knob:  sometimes we notice on a door that a door knob just won’t budge because of some issues. Whether it’s due to age, rust, or some other mysterious force, a stuck door knob is frustrating to deal with for moving smoothly. But fear not, because, with know-how and some tools, you can remove that stubborn door knob or call a professional door repair expert. And get your door working smoothly like before. In this guide, we’ll walk you through the steps to follow a common process on how to remove a door knob that is stuck.

Assess the Situation for Removing Door Knob

Before you proceed to remove the door knob, take some time to assess the situation for removing door knob. Try turning the knob from both directions to see if it moves at all properly. If it’s completely stuck because of some issue, At first you need to apply some lubricant to help loosen it up. If the knob turns but the latch doesn’t retract, it is a problem with the latch mechanism rather than the knob itself.

Gather Necessary Tools

To tackle this job, you’ll need a few basic tools:

  • Phillips Head Screwdriver: Most door knobs are attachment with screws, so using a screwdriver to remove them.
  • Flat Head Screwdriver: In some cases, need a flat head screwdriver for prying off the cover plate and access panel on the knob.
  • Lubricant: WD-40 and somewhat similar lubricant help loosen up any rust and debris that’s causing the knob to stick.
  • Needle Nose Pliers: These come in handy for gripping and pulling out stubborn parts from complexity.

Step-by-Step Removal Process for removing Door Knob

 

When all necessary tools are ready, it’s time to tackle that stuck door knob. Follow these some step:

  • Locate the Screws: Inspect the door knob which is located with the screws holding it in place. These are typically located in many ways. Like on the plate, rosette behind the knob, and also sometimes on the side of the knob itself.
  • Remove the Screws: Use a Phillips head screwdriver to remove the screws. Keep them aside in a safe place so that don’t lose them when it is needed.
  • Attempt to Remove the Knob: With the screws removed, try pulling the knob away from the door. If it comes off easily, great opportunity! If not, move on to the next step for removal.
  • Apply Lubricant: If the knob is still stuck after pulling out, spray some lubricant into whole the gap between the knob and the door. After that spread properly. Wiggle the knob back and forth to work the lubricant into the mechanism for easier moving.
  • Use a Flat Head Screwdriver (if necessary): In some cases, the cover plate or access panel are covering the screws. Use a flat head screwdriver to pry off this cover and access the screws beneath carefully.
  • Try Again: Once after applying lubricant and removing any cover plates, try again to remove the knob. It should come off more easily now. That the lubricant has had a chance to work its like magic.
  • Inspect and Clean: With the knob removed, take a moment to inspect the mechanism and clean away any debris, rust, and any other trash. That is causing the problem.
  • Replace or Repair: Depending on what thing find during your inspection, it need to replace the knob entirely. Otherwise, simply clean and lubricate the existing mechanism for reusing.

Conclusion

Dealing with a stuck door knob is an almost frustrating experience for how to remove door knob . But with patience and the right tools, it’s a problem that you can tackle by yourself or call a professional door repair expert for removing door knobs. By following the steps outlined in this guide. It is easier to remove that stuck door knob and get your door working smoothly again very soon.